The PB 501C built for the Audi RS3 8Y, in 19 inch, 20 inch and 21 inch. Engineered for heavy, fast cars, with enough section to take the loads a four wheel drive RS3 generates out of a corner. Machined to this car's own hub. No spacers, no adapters.

Why two piece

The centre and the barrel are made separately and bolted together. That gives you dish depth a single piece forging cannot reach, and it lets you specify the centre and the barrel in different finishes. On a car with arches as tight as the RS3, dish is where the visual difference is actually made.

Fits

Audi RS3 8Y, 2021 onwards, including the 2024 facelift. Saloon and Sportback.

Sizes

Choose 19, 20 or 21 inch. The RS3 is staggered by width and it is wider at the front. All four wheels are the same diameter and we set the widths when we build the set. The factory fits 19 inch only, so 20 and 21 are an upsize.

Fitment

• Bolt pattern: 5x112
• Centre bore: 57.1 mm, machined to the hub
• Fasteners: lug bolts, M14 x 1.5
• Wheel torque: 120 Nm

Note the bore. The RS6 runs 66.5 mm on the same 5x112 pattern, so a set built for the bigger car bolts up and does not centre. We machine to the RS3.

What you get

• A set of four, forged and finished to order, wider at the front
• Centre and barrel finishes chosen separately, before anything is cut
• Design proof before cutting, two revisions included
• Lifetime structural warranty
• Free UK delivery, fully insured

Lead time

6 to 8 weeks from the day you approve the design proof.

Changed your mind

Tell us any time before we start cutting and you get a full refund. Once machining begins the set is made to your car alone and cannot be resold, so we are not able to refund it after that.