Skip to content

Cart

Your cart is empty

Porsche Macan Forged Wheels

The Porsche Macan brings genuine sports-car engineering to a compact SUV, and owners expect a wheel that meets the standard the badge sets.

We build for the current Macan, the GTS and the Turbo, as well as the new Macan EV, the all-electric Macan, which we treat as its own platform: the EV is heavier, with a different brake package and suspension geometry that a forged wheel has to be engineered around.

Every set is engineered in the UK and made to order, forged, finished and inspected for your specific Macan and variant before it ships.

If you're specifying wheels for a Macan, tell us the variant, petrol or electric, and we'll work from there.

Will they fit your Porsche Macan?

The Macan carries the most dangerous fitment trap in our entire reference, because Porsche changed the bolt pattern between the petrol and electric cars while keeping the model name. Every PB Forged set is made to order, so we always confirm which Macan it is.

Fitment. The petrol 95B is 5x112 on a 66.5mm centre bore. The Electric Macan is 5x130 on a 71.6mm bore. Both use M14x1.5 ball-seat bolts. Factory sizing runs 18x8J and 18x9J up to 21x9.5J front and 21x10J rear.

Petrol 95B. Staggered from the factory at ET21 to ET26 front and ET19 to ET21 rear. Twenty-one inch is the common upgrade and 20 inch the better daily choice, with enough sidewall to cope with British road surfaces.

Two traps, both expensive. First, petrol and electric Macan wheels are not interchangeable in either direction, and nothing about the car's appearance tells you which it is. Second, the petrol car shares 5x112 with Audi, but Audi uses cone-seat bolts and Porsche uses ball seat, so even the hardware is wrong.

Because we forge to order. Whether you search Macan wheels or Porsche Macan forged wheels, tell us petrol or electric first. We will work front and rear separately and supply the correct fasteners, then show you a render on your own car before anything is payable.

Frequently asked

Do you make wheels for the new Macan Electric?
Yes. The Macan Electric (2024+) has a different chassis and weight profile to the petrol Macan, heavier overall, different brake package, different suspension geometry. We engineer for the EV variant as its own platform. Tell us your variant at consultation.
Will these clear the Macan Turbo brakes?
Yes, the Macan Turbo brake package (steel and PCCB carbon ceramic options) is one we engineer for as standard. Clearance is validated at consultation against your exact brake configuration.
Can I put my petrol Macan wheels on the Electric Macan?
No. This is the most dangerous fitment trap in our whole range, because the model name did not change but the hub did. The petrol 95B is 5x112 on a 66.5mm centre bore. The Electric Macan is 5x130 on a 71.6mm bore. Nothing about the car's appearance tells you which it is, and there is no adapter worth fitting between the two. Always confirm the variant before buying any wheel for a Macan.
The petrol Macan is 5x112 like an Audi. Can I use Q5 or SQ5 wheels?
The pattern matches and the bore is close, but the hardware does not. Porsche uses ball-seat bolts and Audi uses cone seat. A cone-seat bolt in a ball-seat hub does not make full contact, which means it does not hold the clamp load it is rated for. Pattern matching is not the same as fitting, and this is the part of it people miss.
What offsets does the petrol Macan run?
It is staggered from the factory, roughly ET21 to ET26 at the front and ET19 to ET21 at the rear, across sizes from 18x8J and 18x9J up to 21x9.5J and 21x10J. Square sets exist in catalogues because one offset is cheaper to tool. We build front and rear separately.
How long is the lead time?
Our wheels are made to order, with a typical lead time of 6 to 8 weeks from order confirmation to delivery. Each set is forged, finished and inspected specifically for your car. If you have a fixed deadline, tell us at consultation and we'll confirm whether the window can compress.

Any of these, built for your Porsche Macan

Every design above can be built for your Porsche Macan. We machine the bolt pattern, the centre bore and the offset to your car, so you never need a spacer or an adapter. Pick one and we will show you it on your own car within 24 hours, free, with nothing payable until you approve it. If they do not fit as confirmed, we remake them at our cost. From £3,099 a set of four.

WhatsApp us